LK Systems LK Group English
Close

LK Group

Fittings

LK PressPex fittings are type approved for all LK Universal PE-X pipes and PAL pipes up to dim 75 mm.LK PressPex fittings...

Read more

LK PressPex fittings are type approved for all LK Universal PE-X pipes and PAL pipes up to dim 75 mm.LK PressPex fittings...

Read more

Eco Straight fitting AX16

Eco Straight fitting AX16

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Straight Fitting

LK PressPex Straight Fitting

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Straight Fitting male

LK PressPex Straight Fitting male

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Straight Fitting female

LK PressPex Straight Fitting female

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

Eco Angle fitting 90° AX16

Eco Angle fitting 90° AX16

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Elbow Fitting 90º

LK PressPex Elbow Fitting 90º

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Elbow Fitting 90º male

LK PressPex Elbow Fitting 90º male

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Elbow Fitting 90º female

LK PressPex Elbow Fitting 90º female

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

Eco Angle fitting 45'  A40

Eco Angle fitting 45' A40

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Elbow Fitting 45º

LK PressPex Elbow Fitting 45º

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex Press Connection T-Piece

LK PressPex Press Connection T-Piece

PressPex T-Piece with loose nut for connecting LK PE-X and PAL Universal pipe to male EuroCone on e....

Eco T-piece AX16

Eco T-piece AX16

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex T-Piece

LK PressPex T-Piece

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex T-Piece male

LK PressPex T-Piece male

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex T-Piece female

LK PressPex T-Piece female

Press fitting for connection of LK PAL and LK PE-X Universal Pipe.

LK PressPex T-Piece with loose nut

LK PressPex T-Piece with loose nut

Press fitting with loose nut, for connection of LK PAL and LK PE-X Universal Pipe to male EuroCone o...

Showing 16 / 40
LK PressPex fittings are type approved for all LK Universal PE-X pipes and PAL pipes up to dim 75 mm.
LK PressPex fittings may only be used for LK PE-X Universal pipe (type X) and LK PAL Universal pipe (type A).
LK PressPex fittings is primarily intended for heating, potable water and cooling water systems and may not be used for the distribution of gas.  All parts of the LK PressPex fittings that are in contact with water is made of DZR (dezincification-resistant brass).
-The designation AX means that the connection is intended for both LK Universal pipes PAL and PE-X and has a grey plastic ring.
-The designation A means that the connection is intended for LK PAL Universal pipe and has a grey plastic ring.
LK PressPex is delivered in nickel plated brass for dim 16-32. Dim 40-75 is supplied in plain brass.Dim 16-75 benefits from leakage indication.
 
Also see listed and approved press fittings on the website of Sweden’s plumbing safety regulations (www.sakervatten.se). In order to check that a press fitting is compressed, a tightness check must be carried out before the final pressure test is performed with 1.43 x the calculation pressure (14.3 bar for tap water systems). Pressurize the pipe system to a test pressure of 3 bar for at least 30 minutes. All joints must be inspected. The pressure may not drop during the period of the check. Read more about tightness testing in the LK assembly instruction.See assembly instructions for pressing with LK PressPex connections. For the range of press machines and jaws please refer to the separate product catalog: Press tools
NOTE! To save time when installing, the press steps can be left so that a greater amount of compressions are made in a row. In these cases there is a great risk that the pipe ends partially slip out of the connection or that some connections do not get compressed. A careful check should therefore be made to avoid leakage.LK recommends joint free pipe-in-pipe systems between visible connection points or placing the connection points in spaces with leakage indication. A joint free installation is always the safest option.
Designation For connection for pipe dim.
AX16 16 x 2.0
AX20 20 x 2,5 and 20 x 2.8
AX25 25 x 3.5
A32 32 x 3.0
A40 40 x 3.5
A50 50 x 4.0
A63 63 x 4.5
A75 75 x 7,5