|Article||Width||Height||Depth||Weight (kg)||Packaging||Item List|
|187 58 27||550 mm||550 mm||120 mm||7||
|187 58 28||550 mm||550 mm||145 mm||7,6||
187 58 27
187 58 28
Pipe inlet for LK Heating Pipe 32 mm PE-X and LK Universal pipe PAL 32 mm with 40-44 mm conduit. Pip...
Pipe inlet for LK PAL Universal pipe A 32 with conduit 40-44 mm. The pipe inlet fits LK Manifold Cab...
Fits all LK's floor heating and Universal cabinets with 40 mm holes for pipe grommet.
Pipe grommet for LK´s installation cabinets for inlet of feed pipe dim 12-34 mm. Pipe inlet dim. 40 ...
Used for LK Manifold Cabinet UNI when pulling a pipe dim. 20-34 through an inlet hole. Cut to the co...
Used for LK Manifold Cabinet UNI when pulling a conduit dim. 25 through an inlet hole. Pre-cut to 25...
Frame with hatch, fitted with hinges, for installation in ceiling. Made from powder coated sheet ste...
Frame with hatch for manifold cabinet UNI recessed in wall. Do not install in rooms with a waterproo...
Frame with hatch for manifold cabinet UNI surface-mounted on a wall. Made from powder coated 1 mm sh...
LK Fire Hatch UNI is intended to be used when LK Manifold Cabinet UNI is installed in a fire-classif...
Outlet plate to LK Drainage elbow, in white or chrome. Fits in LK Drainage elbow V2. Can also be mou...
LK Wet zone hatch Preseal has a prefabricated foil flange that is 50 mm wide and is tested and appro...
LK Hatch HIDDEN for manifold cabinets GV and UNI mounted built into the wall. Frame with hatch which...
The LK Manifold Cabinets UNI 550 L and XL provide more space for supply pipe insulation. The cabinets are manufactured in powder coated steel plate in white RAL 9016, with a watertight base and 50 mm-high front edge.
The LK Drainage Elbow V2 is a complete package for exiting walls with leakage indication from the manifold cabinet. Protective bag included to pull over the cabinet while building is ongoing.
The cabinet will require additional sealing grommets. NOTE! Separate article:
• For a 25 mm conduit through an inlet hole, use the LK Pipe Inlet Conduit 25 (sealing grommet), Art. no. 187 44 83.
• For conduit/pipe sizes 12-34 mm through an inlet hole, use the LK Pipe Inlet UNI (sealing grommet), Art. no. 187 44 84.
For design and hatch range, see LK Manifold Cabinet UNI.
NOTE! The LK Base UNI is not intended for use with this cabinet.
|187 58 27||550 mm||550 mm||120 mm||7|
|187 58 28||550 mm||550 mm||145 mm||7,6|